Cooper Bussmann 11A 1000V DMM Fuse for Fluke Multimeter 15B – DMM 11AR

The Cooper Bussmann 11A 1000V DMM fuse for Fluke multimeter 15B is a fuse that is used on the line side of wiring and other connections in order to protect them from electrical overload. It is also used in any situation where there is a possibility of an overload, such as with power tools, motors, generators and other applications where there is a high amount of current being drawn. The fuse is rated at 11 amps and 1000 volts. The first thing to consider is that you need to replace the fuse with an identical fuse. The reason is that you will be using the same kind of fuse holder as the original, and different types of fuses require different types of holders. For example, if you use a standard-size fuse in a miniature fuse holder, it will not fit; likewise, if you try to use a miniature fuse in a standard holder, it will not fit. So make sure that you get the same type of fuse as before. Before replacing the fuse, you must remove the old one. To do this, simply pull it out with your fingers. There are two ways you can tell whether or not it has been removed: 1) there should be no resistance when pulling it out, and 2) there should be a small metal disc showing through where the hole was in the plastic case. If there is any resistance or no disc showing through, then you must pull harder until you either remove it or break it off inside the fuse holder. To install a new one, push it into place until it “clicks.” You’ll know this has happened when you hear or feel something click into place inside the holder itself.